CRM Solutions

New CRMs for Copper alloys Hiduron 130, 191 and CDA 486 and 954

[fa icon="calendar"] Oct 8, 2019 2:44:40 PM / by Dave Coler

Dave Coler

 

 

 

This October we are excited to introduce four new copper base certified reference materials covering the copper alloy grades Hiduron 130, Hiduron 191, CDA 486 and CDA 954.

Submarine

IARM-CuH130-18 is Hiduron 130 cupronickel alloy. It is characterized by its high strength wear and corrosion resistance. Commonly used in marine applications,  including marine pump shafts and submarine components it contains 13-16% Ni, 0.1 – 1.0% Mn, 0.10% Si, 0.6 – 1.5% Fe and 2.0 – 3.0% Al and Cu as the balance.

IARM-CuH191-18 is a Hiduron 191 medium strength cupronickel alloy. It was designed for marine applications and is commonly used by the oil and gas industry and the Navy.  This alloy contains 0.5% Cr, 13.5 – 16.5% Ni, 0.05% C, 3.5 – 5.5% Mn, 0.15% Si, 0.01%P, 0.70 – 1.2% Fe and 1.0 – 2.0% Al and Cu as the balance.

IARM-Cu486-18 is a CDA 486 Naval Brass.  This alloy contain approximately 59 – 60% Cu, 1.0 – 2.5% Pb, 0.3 – 1.5% Sn and Zn as the balance. This alloy is has a high corrosion resistance to seawater and resistance to wear and fatigue.

IARM-Cu954-18 is a CDA 954 Aluminum Bronze alloy.  This allow is used in a number of fastener applications including nuts, clamps and screws.  This allow has a composition of 3.0 – 5.0% Fe, 1.5% Ni, 10.0 – 11.5% Al, 0.5% Mn and Cu as the balance.

 

Want to know more about these CRMs ?  Visit our new products page to view  and download the certificates of analysis

Visit our New Products Page

 

Would you like pricing or a quotation ?  Contact one of our specialists by completing our request for quote form.

Request Quote

 

 

Topics: Certified Reference Materials, copper base alloys

Dave Coler

Written by Dave Coler

General Manager at LGC ARMI

Subscribe to Email Updates

Lists by Topic

see all

Posts by Topic

see all

Recent Posts